Last meeting of the Working Group 2 dealing with the revision of the current standard on dynamic olfactometry

am . . Zugriffe: 6354

en13725 meeting trieste   It is over. This meeting that took place in February in Trieste, was the last one on the series of the Working Group (WG) 2. The first meeting took place in Barcelona in November 2012 and after five and a half years of discussions, the first draft is here.

   Some of the hot issues, that have arisen during the last meetings were brought again to the experts. Will there be finally more assessors doing the olfactometric measurement? Will the time to analyse a bag after sampling change? Will there be a new reference substance to calibrate the panel? Will there be a new design of sampler for passive sources? How will be finally uncertainty handled?

   These and more questions were dealt during the very last meeting. Some of the issues have been already discussed in many meetings, like panel size. Will there be a minimum of 4, 6, 8 or more assessors participating in the measurement?

   In previous discussions in former meetings, the people of the task group dealing with uncertainty showed that there is a clear improvement in the uncertainty budget if more assessors were used by the olfactometric laboratory.  Regions like Ontario, Canada, use at least 8 assessors in the measurement. In the Netherlands there will also be a change in the number of assessors and it looks like a minimum of 8 assessors will be needed to perform an olfactometric measurement. A very interesting research paper presented last month by Mike McGinley at the conference of the last conference on odour management organized by the WEF in Portland, dealt with this very same hot issue.  

   The minimum panel size will remain being four in the coming EN 13725 standard, but that does not mean that this number is the right panel size all the time. The olfactometric measurement must meet the uncertainty requirements given by any legislation and/or competent authorities or specified in the task to be done.

   Uncertainty is somehow defined in other standards. For example, the standard EN 15267-3 requires that the total uncertainty of the measured values determined in the performance test should be at least 25 % below the Maximum Permissible Uncertainty (MPU) specified e.g. in applicable regulations.

   If no uncertainty is required, the sky is the limit, but at least a minimum of 4 assessors must participate in the measurement.

   For example, the European Industrial Emission Directive (IED) does have some uncertainty requirements set for known pollutants (although not for odours). The IED uncertainty requirements are expressed as 95% confidence intervals and are referred to as the MPU in the standard EN 14181.

   In cases were odour concentration abatement performance of equipments must be tested, a careful selection of the proper panel size must be clearly done. Panel size should be also carefully taken into account when the results of an olfactometric measurement are very close to the limit set by the regulators. Other measures to improve uncertainty such as  taking replicate samples could be considered .

   As for the time to analyse a sample, the maximum storage time will remain 30 hours, so no changes here either, It is clear that there is a decrease of the odour concentration in the bag through time, and this factor should be considered in order to estimate the storage time.

   As it is widely known, in Germany, this time is set to be a maximum of 6 hours. In the Chilean standard Nch 3886 on static sampling for olfactometry, the time is recommended to also be 6 hours. In both the German and the Chilean standard, the storage time can be longer if proved that there is no degradation of the sample throughout time. However, among the European experts there was not much consensus on the maximum storage time, so it was left as it is now in the current text. However, some notes were included in the text to consider the proper storage time.

   The discussion on new reference materials did conclude and the final text was approved. The new standard 13725 will define a new procedure to design and test any new reference odorant. The idea behind is to select better reference materials to improve the uncertainty due to panellist selection.

   Last but not least, a lively discussion was hold on the use of samplers for passive area sources. Some data have shown large differences in the results obtained by flux chambers as compared to wind tunnels.

   All in all, this last meeting of the WG2 paves the way to the new EN13725 that will hopefully be published in 2019. Stay tuned for more news!


   If you find this article interesting, you might also be interested in these articles:


Kommentare (0)

There are no comments posted here yet

Einen Kommentar verfassen

  1. Posting comment as a guest.
Anhänge (0 / 3)
Share Your Location

Please note that this site uses cookies in order to work properly.

See more about our cookie policy Learn more

I understand

Please read the following to learn more about our cookies policy:


What are cookies?

   A cookie is a text file stored in a user’s web browser on any device they use to access a website that holds information regarding the user’s visit, such as preferences. When the user returns, the browser provides the cookie with the stored information to the site.

What cookies are used for?

   Cookies are used for adjusting a website’s content to fit a user’s preferences and optimize the website. They store useful information that improve the user’s experience of a website. They are most commonly used for:

  •     Recognizing the type of device a user is browsing with and any preferences applied to optimize the website specifically for the device.
  •     Creating statistics that help website owners to understand how their users interact with their website, which allows them to improve their structure and content.

What types of cookies are used?

   There are two types of cookies: persistent cookies and session cookies. Persistent cookies remain on your hard drive for a period of time specified in the cookie’s file parameters or until removed manually. When you return to a website and it requires you to login again despite previously storing your login information, it is usually because the persistent cookie expired; this helps to increase security while maintaining accessibility.

   Session cookies, on the other hand, are used temporarily and expire once the website or browser is closed. They are used to track user activity on a website during a single visit. When a website requires that you verify your age or location once every visit before allowing you to view content and without requiring additional personal details, that is a session cookie at work.

Do cookies include personal data?

   If there is a need for the collection of personal information, such as for creating accounts, then cookies may store personal information. However, it is required by data protection law that users are informed of the collection of personal data. This data will also be encrypted to render it inaccessible for unauthorized users.

Managing cookies

   By default, browsers are configured to accept cookies. However, these settings may be changed to block cookies entirely, or to inform the user each time they are used. Detailed information about cookies and the options associated with them are available in each browsers’ settings.

Which cookies does collect collect cookies for 2 purposes:

  • Register statistical data.
  • Set language preferences.

   In addition we use third party cookies through Statcounter to collect different data.

StatCounter Analytics Cookies

   StatCounter is a web analytics service. We use StatCounter to track activity on our website. These stats help us to understand how people are interacting with our website and to improve the design and functionality of our site so that we can offer a better online experience to our visitors. If you visit, a StatCounter analytics cookie (called "is_unique") may  be placed in your browser.  This cookie is used only to determine whether you are a first-time or returning visitor and to estimate unique visits to the site. No personal information is stored in the cookie.

Refuse Statcounter cookies.

You may set your browser to refuse/accept StatCounter analytics cookies by clicking here.


    • Your decision to refuse/accept StatCounter analytics cookies applies to all websites which use the StatCounter service (including the StatCounter site itself).
    • If you refuse all StatCounter analytics cookie, a refusal cookie (called "refusal_cookie") will be set to remember this preference and any existing StatCounter analytics cookies in your browser will be destroyed.
    • If you delete/remove/destroy the refusal cookie, you must revisit this page in order to re-set your preference.
    • The refusal cookie is set only for your current browser and machine. If you use multiple browsers/machines, you must set a refusal cookie in each case.
    • You can also change your cookie settings directly in your browser. Learn more about cookies and how to manage them here:
    • Or you can learn about how to adjust cookie settings for specific browsers here: